my new ride...und I no gonna pimp it...

dubchickshubby · Post by **dubchickshubby** » Fri Mar 24, 2006 4:56 pm

1lowcab wrote:
When the balls dry, I will snap a pic
LMAO!!!

sorry, i couldn't help myself.

HAR HAR!!!

ROTFLMAO I wonder, did the Admin edit the picture of your balls? It was the only picture not displaying!

Post by **Briano1234** » Fri Mar 24, 2006 5:01 pm

Okay...I hung the golden balls.

After they were dry.

Post by **Calimus** » Fri Mar 24, 2006 6:04 pm

I'm sure that looks a lot better in person Brian, but from the pic, your balls

look a bit out of place. Oh and you might want to re-adjust them a tad.

speedtek · Post by **speedtek** » Fri Mar 24, 2006 6:07 pm

What the hell are those things for anyways? I've seen them before, but I never had any on my Cabby

1lowcab · Post by **1lowcab** » Fri Mar 24, 2006 7:31 pm

vacuum reservoir. i had them on mine but removed it when i removed the A/C.

Post by **kuklaki** » Fri Mar 24, 2006 11:16 pm

It's the Rabbit that laid the golden eggs! (Keeping you dirty minded folks on track is just useless!)

speedtek · Post by **speedtek** » Sat Mar 25, 2006 1:31 am

1lowcab wrote:vacuum reservoir. i had them on mine but removed it when i removed the A/C.

That's kind of what I figured, but since I've never had one, I never really had a reference for it. Is that why my HVAC controls don't work? LOL (that and the cam

)

1lowcab · Post by **1lowcab** » Sat Mar 25, 2006 8:43 am

the HVAC controls should still work.
theres one little vac line that tees off at the brake booster line, it runs inside to the dash. check it and make sure theres no cracks in it and it's connected.
mine had a little hole in it, leaked just enough so my HVAC controls wouldn't work.

Post by **Briano1234** » Sun Mar 26, 2006 2:56 am

Dodge makes a Vaccuum check valve that is very large about 1 1/2 inches in diameter by 2 inches long.

This holds a good vaccuum under load, so that your vents don't change position, similar to our "Egg Crates". You could do away with the "Egg Crate" by installing one of those.

They are on all Dodge Caravans from 1992 to 1995 that I know of. They are located next to the brake booster and left of the throttle body.

Post by **Briano1234** » Sat Apr 01, 2006 12:57 am

Well the ass monkey that was goign to fix the seats doubled the price when I brought it in. So I told him gee for 25 dollars more I will get tmi covers. Went home and www'ed them they may not be in in time for bug-a-paluza. But the top arrives next week.....yeeeeeehaaaaaaawwwwww

Post by **Calimus** » Sat Apr 01, 2006 2:03 am

bastard ass monkey

Post by **Briano1234** » Sun Apr 02, 2006 8:41 pm

Well the oil gerpumpin ist kaput. so I have to order a new one, I am hoping that NOPI has one for less than the other stores around as 200 to 139 is a little steep as I can get it for 59 for a 2.0 off the web.

so if any of yall know a good place locally to get one other than the same tired old stores. LET me know.

ps got the Bee-Sting antenna to replace the uggggly one that was on the car when I bought it.

so that is about all I have done today.

Post by **Calimus** » Mon Apr 03, 2006 12:51 am

Brian, I have an oil pump that was in working condition when I pulled it from Cristines cabby. I swapped it for a 2.0 pump. I also have one that in like new condition, but I think it's still attached to the lump that came out of the crabby cabby.

you can have whichever one we can locate to help ya get her back up and running. Only cost would be the trip out here.

I'll be at work tomorrow, but feel free to call me there 770-423-7832 (9am-6pm) and let me know. If I don't answer, I might be in a meeting, just leave a vmail, it will page me.

Post by **Briano1234** » Mon Apr 03, 2006 3:08 am

Calimus wrote:Brian, I have an oil pump that was in working condition when I pulled it from Cristines cabby. I swapped it for a 2.0 pump. I also have one that in like new condition, but I think it's still attached to the lump that came out of the crabby cabby.

you can have whichever one we can locate to help ya get her back up and running. Only cost would be the trip out here.

I'll be at work tomorrow, but feel free to call me there 770-423-7832 (9am-6pm) and let me know. If I don't answer, I might be in a meeting, just leave a vmail, it will page me.

awesome....I may call ya early as I get off at 7:00am.... but we can arrange a meet.

Post by **Calimus** » Mon Apr 03, 2006 9:41 am

7am, ick, my eye's arn't even cracked open by then, lol.

however, I'll PM ya my cell # for anything outside of work hours. I'm almost certain that the "almost new" pump is on the bottom of the orginal engine from the crabby cabby. Problem is, there is a ladder and scirocco interior in the way. Ahh hell, I need to clean up in there anyway. I'll see if I can get to it when I get home tonight.