size and position of brake caliper bolts...

Post by **Briano1234** » Fri Apr 29, 2005 11:07 am

I am bad.....I had to replace a caliper today and am stuck

Where does the long caliper slide bolt go ...top or bottom

BigDaddy90Cabby · Post by **BigDaddy90Cabby** » Fri Apr 29, 2005 11:43 am

If youi are speaking of The Upper and Lower Guide Pins...Usually upper is longer, shorter is bottom.. I tried to catch you in a PM, but dont know if you got it. Hope that helps.. Let me know

Post by **Briano1234** » Fri Apr 29, 2005 12:06 pm

yep....decided to bleed them as It didn't matter if the pins where correct for that ...Thanks Jimmy, had a brain or brian fart.....

Post by **Briano1234** » Fri Apr 29, 2005 12:38 pm

Dam How STUUUUUUpid are I. Jimmy Clued me in with great help....but I still didn't like how the bolts were never getting tight and they were exceeding the distance of the caliper....

I took the Dam thing off, and the new Caliper didn't have the slides in it. Once I got the slides in it was a real no BRIANER....opps Brainer....

DAM DAM STUUUUUPID STUUUUUUPID STUUUUUUPID....I'm my own Granpa.....I'm my own Granpa.......

THANKs JIMMMMMMMMMMMINEY you are my favorite Texan, and I woun't do any of the Sabine Coonass jokes....ever again....well not this week anyway.

BIG GEORGIA KUDOS......

BigDaddy90Cabby · Post by **BigDaddy90Cabby** » Fri Apr 29, 2005 1:28 pm

Hey, glad I could be of some ass-istance.... I think