95 Cabrio - Instrument Cluster
Moderators: kamzcab86, CalAltaDubber
-
- Posts: 1
- Joined: Tue Aug 07, 2012 1:10 pm
- What year is your cabby?: 1995
- Do you own a Cabriolet?: Yes
95 Cabrio - Instrument Cluster
So, I've had the car about a week and have been doing some troubleshooting. I've got my problem with the instrument cluster narrowed down to a loose connector on the back of the cluster. Now I'm not sure how to proceed. Basically anytime I hit a bump, the indicators on the cluster go in or out... usually out. Sometimes I can get them to come back by giving the dash a little "love tap". Would it be possible/feasible to go "sans connector" and wire directly to the pins, or is there a simpler solution you would suggest?
- Briano1234
- Whats that smell?
- Posts: 4105
- Joined: Mon Mar 21, 2005 5:45 am
- What year is your cabby?: 1992
- Do you own a Cabriolet?: No
- Location: Duluth, Ga
- Contact:
Re: 95 Cabrio - Instrument Cluster
Take the mylar off the connector on the cluster, and place a piece of electrical tape under the mylar on the plastic tongue.
Briano
Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click....
Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click....