Plug wires resistance values

Post electrical issues and questions here

Moderators: kamzcab86, CalAltaDubber

Post Reply
User avatar
bLac K aBriOleT89
Posts: 175
Joined: Thu Aug 19, 2004 3:17 pm
What year is your cabby?: 1989
Do you own a Cabriolet?: Yes
Location: North Miss / Memphis, TN

Plug wires resistance values

Post by bLac K aBriOleT89 »

Not Cabby but maybe William???
Can somebody post the appropriate wire resistance values for an mk4? I'started to run rough today and I want to start by measuring that.....The all-time trusted Jetta is running crappy!
1989 Graphite Black Metallic Cabriolet

2005 BMW X3 3.0i - Sapphire Black Metallic

2002 BMW M3 - Steel Gray-Coupe, 6 sp
User avatar
kamzcab86
Queen and Popette of Cabbydom
Posts: 1277
Joined: Wed Sep 11, 2002 3:54 pm
What year is your cabby?: 1986
Location: Arizona
Contact:

Re: Plug wires resistance values

Post by kamzcab86 »

For a 12V VR6: 5.7-6.2 ohms. Check the coil pack too (from what I keep reading, it's a common failure item :roll: ): http://forums.vwvortex.com/zerothread?id=793322 .

:beer:
User avatar
bLac K aBriOleT89
Posts: 175
Joined: Thu Aug 19, 2004 3:17 pm
What year is your cabby?: 1989
Do you own a Cabriolet?: Yes
Location: North Miss / Memphis, TN

Re: Plug wires resistance values

Post by bLac K aBriOleT89 »

Thanks Kammy (always to the rescue!) :) I checked resistances and all were within specs. Did the water test to the coil pack and no sparks or anything. Now I'm gonna read something about the MAF sensor to see if the sympthoms match....
But the poor Road Eater is vibrating, missfiring, and smelling rich gas...
I'm gonna do the test on your link to double check...
1989 Graphite Black Metallic Cabriolet

2005 BMW X3 3.0i - Sapphire Black Metallic

2002 BMW M3 - Steel Gray-Coupe, 6 sp
User avatar
Briano1234
Whats that smell?
Posts: 4105
Joined: Mon Mar 21, 2005 5:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

Re: Plug wires resistance values

Post by Briano1234 »

unplug the o2 and CTS....... one at a time of course....
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:
User avatar
bLac K aBriOleT89
Posts: 175
Joined: Thu Aug 19, 2004 3:17 pm
What year is your cabby?: 1989
Do you own a Cabriolet?: Yes
Location: North Miss / Memphis, TN

Re: Plug wires resistance values

Post by bLac K aBriOleT89 »

I wire was shorted out, plus the plugs were the originals, put a new fuel filter too.....running like new!!
1989 Graphite Black Metallic Cabriolet

2005 BMW X3 3.0i - Sapphire Black Metallic

2002 BMW M3 - Steel Gray-Coupe, 6 sp
User avatar
kamzcab86
Queen and Popette of Cabbydom
Posts: 1277
Joined: Wed Sep 11, 2002 3:54 pm
What year is your cabby?: 1986
Location: Arizona
Contact:

Re: Plug wires resistance values

Post by kamzcab86 »

Rock on! :thumbup: 8)

That reminds me; while they're not the originals, I need to replace the plugs in mine too. :? The last time I was at the dealer, the service advisor tried talking me into the 80K service (glorified oil and plug change); they should really just call it a "check-up"... pay $500 for them to spend 4 hours checking this and checking that. :roll:
User avatar
bLac K aBriOleT89
Posts: 175
Joined: Thu Aug 19, 2004 3:17 pm
What year is your cabby?: 1989
Do you own a Cabriolet?: Yes
Location: North Miss / Memphis, TN

Re: Plug wires resistance values

Post by bLac K aBriOleT89 »

Yeah..some ppl say that the plugs are good for 100,000k miles which I doubt. I was just neglecting some maintenence. The fuel filter was the original too. These cars are incredible, if it wasn't for the wire going potatoes who knows for how long i would have kept the plugs and filter.... :rmad:
The other thing is the car is running so good, so smooth, and responsive, I didn't remember that's the way it suppose to be! Since the power decreases so slow you don't even feel it. Now I'm reviving the moments when I first drove it again! Also I discovered how easy is to change the plugs!
1989 Graphite Black Metallic Cabriolet

2005 BMW X3 3.0i - Sapphire Black Metallic

2002 BMW M3 - Steel Gray-Coupe, 6 sp
User avatar
Briano1234
Whats that smell?
Posts: 4105
Joined: Mon Mar 21, 2005 5:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

Re: Plug wires resistance values

Post by Briano1234 »

bLac K aBriOleT89 wrote:Yeah..some ppl say that the plugs are good for 100,000k miles which I doubt.
I just replaced the bosch plat 1's in my dodge caravan they had 120K on them... there was only one that was bad.... the other 5 looked great, but the electrode was cracked on one.


I like you Juan, am amazed at the pep of the beasty..... and it has 278K
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:
User avatar
bLac K aBriOleT89
Posts: 175
Joined: Thu Aug 19, 2004 3:17 pm
What year is your cabby?: 1989
Do you own a Cabriolet?: Yes
Location: North Miss / Memphis, TN

Re: Plug wires resistance values

Post by bLac K aBriOleT89 »

It really makes a difference....The only bad thing about it though...is that the VR plugs are $20 a piece!! :rmad: :eek:
User avatar
kamzcab86
Queen and Popette of Cabbydom
Posts: 1277
Joined: Wed Sep 11, 2002 3:54 pm
What year is your cabby?: 1986
Location: Arizona
Contact:

Re: Plug wires resistance values

Post by kamzcab86 »

At least they don't have to be changed as often. $20 a piece plus $105/hour that a dealer charges for labor... well, you still saved yourself some major bucks doing it yourself! :mrgreen:
User avatar
bLac K aBriOleT89
Posts: 175
Joined: Thu Aug 19, 2004 3:17 pm
What year is your cabby?: 1989
Do you own a Cabriolet?: Yes
Location: North Miss / Memphis, TN

Re: Plug wires resistance values

Post by bLac K aBriOleT89 »

Absolutely. And plus the wire and the fuel filter change I guess they would have charged at least TWO hours if not more.....
Saved under the sleeve I have an independat VW shop that charges $80 an hour.....
1989 Graphite Black Metallic Cabriolet

2005 BMW X3 3.0i - Sapphire Black Metallic

2002 BMW M3 - Steel Gray-Coupe, 6 sp
Post Reply