Look at the rear doors on a 90 Passant, there are usually 2 good switches, as they hardly ever get used.
There is a problem that the switch is bass ackwards from the cabby, but never fear.
Crappy pic but you see that the switch emblem is upside down.
Push on the center pivot that will allow the switch top to wiggle out on both switches
If you look the insides of the switch are identical, it is the cap that is the issue the cabby’s
Rocker tabs are on the opposite of the Passant
Shot showing the center pivot with the cap removed, you can also see the tabs in opposite positions
Simply snap in to place the cabby top on the passant switch and presto you have a working switch.
