The last two Strut mounts I bought Meyle brand were a PITA to install.
As I was tightening the nuts on them, the press bolt broke free with about 1/4 inch to go till it was fast.
What made it worse was that the nut could not be removed, not tightened...
To effect the removal was for naught, until I had the eureka moment.
I locked a pair of vice grips on the nut and had my Son hold upward pressure on it.
I got my wire welder up the strut housing and Tack Welded the press bolts head to the mount.
Then I could take the nut off and pull the strut assembly out and tack weld both the press bolts to the mount.
I suggest that it may be a wiser thing to just Tack Weld them at the outset...
This way the bolt can't spin or drop out. When I looked at the Meyle box were the fateful words "MADE in CHINA".
Beefing up the Strut mount.
Moderators: kamzcab86, CalAltaDubber
- Briano1234
- Whats that smell?
- Posts: 4105
- Joined: Mon Mar 21, 2005 5:45 am
- What year is your cabby?: 1992
- Do you own a Cabriolet?: No
- Location: Duluth, Ga
- Contact:
Beefing up the Strut mount.
Briano
Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click....
Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click....