How to remove/replace your top latch.

Have you done so much to the car today that it just doesn't fit into one section, or are you too damn lazy to split it all up? Either way, this is the section for you.

Moderators: kamzcab86, CalAltaDubber

Post Reply
User avatar
Briano1234
Whats that smell?
Posts: 4105
Joined: Mon Mar 21, 2005 5:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

How to remove/replace your top latch.

Post by Briano1234 »

Open or unlatch your top to access the 3 screws.
The screws may be rusted, so you may want to use some PB-Blaster and allow it to work.
If the Screws are rusted then you may also want to use a hammer to the back of the screw driver to shock the screws prior to removal.

Image

Raise the latching handle and remove the 2 countersunk Phillips screws.

Image

Move the headliner back to get to the big Phillips screw

Image


Push down and lift out.

Image

Image

Ta-daaaaaaaaaaaa its out.

Image

Nows the time to use a tad of never-sieze to the screws when you go back.
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:
User avatar
Calimus
Grand High PooBah
Posts: 2892
Joined: Mon Sep 02, 2002 11:40 pm
What year is your cabby?: 1989
Do you own a Cabriolet?: Yes
Location: Cartersville, Ga

Re: How to remove/replace your top latch.

Post by Calimus »

never-sieze gets my vote for product of the decade. I've used it on more things in the past few years then I can count and it's worked flawlessly.

As always Brian, nice writeup. :thumbup:
16' Challenger ScatPack
05' Yamaha FJR1300
02' Honda VTX 1800C
Post Reply