while they fit on a cabby
it is clear
they were not MADE for a cabby...
passenger side is not worth photos
bad things happened
what i did...
Moderators: kamzcab86, CalAltaDubber
-
PDX Cabby
- The Living Bentley Manual
- Posts: 523
- Joined: Tue Dec 30, 2003 12:51 am
- What year is your cabby?: 1985
- Do you own a Cabriolet?: Yes
- Location: Portland, OR
- Contact:
what i did...
while they fit on a cabby
it is clear
they were not MADE for a cabby...
passenger side is not worth photos
bad things happened
85 Cab - 1.9L 8v, g-grind, euro dual downs to TT race w/ Borla, VWMS fuel dizzy, 2H tranny with 5th gear swap, TT short shift, FK 60/40, 15" BBS RA, rear disks... begging for boost...
-
CalAltaDubber
- Frozen Guy in the Northern Country
- Posts: 2012
- Joined: Thu Aug 12, 2004 11:10 pm
- What year is your cabby?: 1987
- Do you own a Cabriolet?: Yes
- Location: Calgary, Alberta, Canada
- Contact:
-
dubchickshubby
- Posts: 164
- Joined: Mon May 02, 2005 9:32 pm
- Do you own a Cabriolet?: Yes
- Location: Rhode Island
Re: what i did...
Lookin sweet!PDX Cabby wrote:
while they fit on a cabby
it is clear
they were not MADE for a cabby...
What WERE they made for???? 
Her car, my tools. It's all about sharing!
///Ocean State Dubs
'87 red/white Cabby
'92 Triple white Cabby(an 8V decked and overbored nightmare. 303 Cam baybee!)
///Ocean State Dubs
'87 red/white Cabby
'92 Triple white Cabby(an 8V decked and overbored nightmare. 303 Cam baybee!)
-
PDX Cabby
- The Living Bentley Manual
- Posts: 523
- Joined: Tue Dec 30, 2003 12:51 am
- What year is your cabby?: 1985
- Do you own a Cabriolet?: Yes
- Location: Portland, OR
- Contact:
Rabbit's
the fit is perfect and snug
but thanks to the cabby side support rail, this was a PITA
so far as I can tell, this is only the 3rd cabby in the US with zender side skirts (excluding full zender kits cause they're different)
the fit is perfect and snug
but thanks to the cabby side support rail, this was a PITA
so far as I can tell, this is only the 3rd cabby in the US with zender side skirts (excluding full zender kits cause they're different)
85 Cab - 1.9L 8v, g-grind, euro dual downs to TT race w/ Borla, VWMS fuel dizzy, 2H tranny with 5th gear swap, TT short shift, FK 60/40, 15" BBS RA, rear disks... begging for boost...
-
PDX Cabby
- The Living Bentley Manual
- Posts: 523
- Joined: Tue Dec 30, 2003 12:51 am
- What year is your cabby?: 1985
- Do you own a Cabriolet?: Yes
- Location: Portland, OR
- Contact:
CalAltaDubber wrote:Knowing you Isaac, you will fix it up to "Photo" quality.
But the driver side looks real good!
Good idea.
Well, passenger side got done too
but by the time i got over there, bad things happened.
after much cursing, beating my head against the wall, and being glad my car will be going to paint this summer cured most of that...
but its not a pretty site, so no show
85 Cab - 1.9L 8v, g-grind, euro dual downs to TT race w/ Borla, VWMS fuel dizzy, 2H tranny with 5th gear swap, TT short shift, FK 60/40, 15" BBS RA, rear disks... begging for boost...
