Help required sourcing part in Australia

GOLFBALLS · Post by **GOLFBALLS** » Thu Aug 12, 2004 9:37 pm

I saw you guys on the net and was wondering if any of you have that small black plastic insert that goes at the back of the licence plate on the rear boot lid of the golf convertible,it covers the whole indented panel and fits between both rear tail lights.....I'd buy one on Aust but they want $140 for it and wreckers will only sell me the entire boot lid with this bit att for 400 plus

If anybody knows a good place to go that will ship to Aust please let me know

...I'm bloody desperate for this part

Please contact me on luke.pitt@gilbarco.com

1lowcab · Post by **1lowcab** » Fri Aug 13, 2004 12:52 am

sorry man, the filler panel i took off mine went in the trash.... i knew i should of kept it!

Post by **kuklaki** » Sat Aug 14, 2004 12:10 am

GOLFBALLS wrote:I saw you guys on the net and was wondering if any of you have that small black plastic insert that goes at the back of the licence plate on the rear boot lid of the golf convertible,it covers the whole indented panel and fits between both rear tail lights.....I'd buy one on Aust but they want $140 for it and wreckers will only sell me the entire boot lid with this bit att for 400 plus If anybody knows a good place to go that will ship to Aust please let me know ...I'm bloody desperate for this part

Please contact me on luke.pitt@gilbarco.com

I'll keep my eyes open for you, i know that there are other junkyard addicts here and it shouldnt be too hard for one of us to source one. Do post again if you manage to find one first.
What part of Aussie are you in, anyways?

GOLFBALLS · Post by **GOLFBALLS** » Sun Aug 15, 2004 11:09 pm

Hope you guys can help here I'm from sydney and have owned types 1 2 and 33's
a golf Gti (mark 1) and 3 Kombi's (....even a 66 safari bus) The golfs my
car and I need to make it right ( yes very anal)...anyway hope of of you guys can help

Luke

CalAltaDubber · Post by **CalAltaDubber** » Wed Aug 18, 2004 10:45 pm

Luke,

Imight be able to help here.

Our local VW shop here in Calgary, has a Cabriolet that has been in an accident that they are parting out.

The part you are looking for is in good condition.

The shop is called Concept-1 VW Werks here is a link to their site

http://www.concept1.ca/

Good Luck!

Topless Rabbit Forums

Help required sourcing part in Australia

Help required sourcing part in Australia

Re: Help required sourcing part in Australia

Thanks guys