How to remove the lock Cylinder from a Trunk lock.

Post body issues and questions here

Moderators: kamzcab86, CalAltaDubber

Post Reply
User avatar
Briano1234
Whats that smell?
Posts: 3961
Joined: Mon Mar 21, 2005 6:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

How to remove the lock Cylinder from a Trunk lock.

Post by Briano1234 » Tue Apr 04, 2017 7:44 pm

Remove the cover over the lock assembly.
Image

Remove Latch arm out of the lock
Image
Image

Remove the 2 Phillips screws
Remove the lock assembly, and take care of the seal.

On the back of the latch there is a Pin.
Image

Force this pin out a wee bit to the outside.
Image

Push the lock up, this will allow you to push the pin out of the casing
Image
Pull the Pin.


The lock now comes out from the front like all the others.

Image

Return is reverse of removal

You can take the pin out on the car and pop the lock cylinder out...
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:

Post Reply