Heater Control Limits..

Post all your engine questions and issues here and get help from the members

Moderators: kamzcab86, CalAltaDubber

Post Reply
User avatar
Briano1234
Whats that smell?
Posts: 4051
Joined: Mon Mar 21, 2005 5:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

Heater Control Limits..

Post by Briano1234 » Sun Jan 10, 2016 3:13 pm

Well, I had to change my metal heater valve as it was leaking, fortunately I had a spare.
As I reassembled it to connect the control cable I couldn't get it to move. Well I found out why, my heater control
was wonky.... I also discovered that when the control is mid-way between heat and cold was the full off position.

Yep, that is the fact, the cable only moves between full hot and the start of the cold where you feel the detent.
My lever wasn't smooth. I tried to oil it, but nada.

I found a Burr in the mechanism.

Lever Fully Hot for movement.
Image

Lever Fully Closed for movement.
Notice where the cable arm is, the detent is in the middle.
Image

Notice that the full cold, still has the Cable Lever in the center but the cold goes over for the a/c to go Max.
Image

Where I found my issue is at the inner 90 degree, there was a Burr or something, I filed both sides and greased it now it moves freely.
Image

Image

Just when you thought that you were loosing your mind,,,,,
The Stops on the Valve should be adjusted to min max, but you probably need to re-position your cable.
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:

Post Reply