Throttle Cable

Post all your engine questions and issues here and get help from the members

Moderators: kamzcab86, CalAltaDubber

Post Reply
User avatar
allibug
Posts: 1
Joined: Sat Jul 25, 2015 9:53 pm
What year is your cabby?: 1988
Do you own a Cabriolet?: Yes

Throttle Cable

Post by allibug » Mon Jul 27, 2015 9:03 pm

Hey Everyone!

I am doing a little restoration project on an '88. The throttle cable was broken in about 4 places, so we ordered a new one from ECS. What showed up is much shorter and has a nut at the end of the cable, rather than the fitting that goes over the ball stud, which is what I have.

Question is: Is there an adapter or do we need another cable?

Thanks!

Allie
allibug

User avatar
Briano1234
Whats that smell?
Posts: 3987
Joined: Mon Mar 21, 2005 5:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

Re: Throttle Cable

Post by Briano1234 » Thu Jul 30, 2015 11:00 pm

Sound as if they shipped the wrong cable, or the correct cable for the wrong car.
Is your car automatic, or manual?

The Automatics have the Accelerator cable from the pedal to the Transmission, then a separate cable from the Kickdown arm to the Throttlebody.

Manuals all go from the pedal to the Throttlebody and is a little shorter than the automatic one.

But regardless they should have a black plastic fitting on one end that the clip will go over to lock it on the Ball stud.

If you can snap a picture of it that would be great.
FRom your old to your new.
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:

Post Reply