Removing digifant injectors

Post all your engine questions and issues here and get help from the members

Moderators: kamzcab86, CalAltaDubber

Post Reply
Thicketmatt
Posts: 37
Joined: Sun Jun 30, 2013 11:33 am
What year is your cabby?: 1993
Do you own a Cabriolet?: Yes
Location: Charlotte NC

Removing digifant injectors

Post by Thicketmatt »

I want to clean my injectors and replace the rubber seals. Any suggestions on how to pull the injectors out? Can i do it by hand, or should I use a tool like on the CIS units? Thanks
User avatar
Briano1234
Whats that smell?
Posts: 4105
Joined: Mon Mar 21, 2005 5:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

Re: Removing digifant injectors

Post by Briano1234 »

Remove the connectors on the injectors and off the injector rail.
Remove the 2 5mm allens on the Fuel pressure regulator
Take the fuel rail off 2 5mm or 6mm allens can't remember 5mm is probably right
With a flat blade PRY the Injector rail up in the direction that the injectors are in.
Some of the injectors will usually come out with the rail.
For the others use a pair of hose pliers (I have a 12 inch long one that has the circle meet. Then pry up and out.
See my how to for cleaning the injectors as you will need a 9vdc battery and carb cleaner.

But the O-rings for no more than 8 bucks for all 8 at Napaonline.com.

When re-installing them use a little gas, or charcoal lighter to lubricate them.
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:
Post Reply