Heads up on Alternator replacements.

Electrical mods for the hi-end modder. Such as wiring harness hacks, swaps, etc...

Moderators: kamzcab86, CalAltaDubber

Post Reply
User avatar
Briano1234
Whats that smell?
Posts: 4092
Joined: Mon Mar 21, 2005 5:45 am
What year is your cabby?: 1992
Do you own a Cabriolet?: No
Location: Duluth, Ga
Contact:

Heads up on Alternator replacements.

Post by Briano1234 » Mon Apr 08, 2019 9:37 am

My LLW Alternator that I replaced just had a semi-failure.
The Case screws that hold the body together had a strippage from the re-builder.
One of the Case screws backed out due to strippage and started to hit the Alternator fan.
A 4.5mm Nut wasn't replaced on the screw on the back, so I added 3 more to prevent this from happening.

So if you get a replacement alternator, be sure that you use 4.5 mm nuts and lock washers to the back of the case bolts to prevent this from happening to you.

missing nuts.

Image
Briano

Yes as matter of fact, I have the Luck o'the Irish...everything I touch turns to fertilizer of the bovine variety.
You can lead a user to a link, but you can't make him Click.... :screwy:

Post Reply