Search found 5 matches
- Tue Nov 27, 2012 1:37 pm
- Forum: Engine
- Topic: Creating your own Dual Down Pipe.
- Replies: 2
- Views: 2438
Re: Creating your own Dual Down Pipe.
Hi Brian. Good write up.. I have an intact 90 corrado with Its g60 and i was thinking of dropping its 1.8 G into my 88 cabby.. Any experience with this swap or links to somebody elses work would be appreciated. I want to take the engine and harness from the 90 but keep the auto tranny currently in t...
- Sun Sep 16, 2012 11:31 am
- Forum: Convertible Top
- Topic: Convertible top fitment
- Replies: 10
- Views: 9071
Re: Convertible top fitment
It folds down quite flat. The locks engage to keep it down etc. Well the old top did, on this frame, the new ones seems resistant to folding flat yet due to newness.. I was given the original frame but it's rotten, so I never considered using it. Where can I get the J hooks as I want to replace them...
- Sun Sep 16, 2012 1:24 am
- Forum: Convertible Top
- Topic: Convertible top fitment
- Replies: 10
- Views: 9071
Re: Convertible top fitment
Well, unfortunately there was no improvement to be made by loosening the main 3+1 frame bolts on the sides to try and fit the top better along the front. Next option and plan will be to remove the upper and rear bolts, both sides and try to pivot the whole frame forward a few mill's. If that worksI ...
- Tue Sep 04, 2012 11:09 pm
- Forum: Convertible Top
- Topic: Convertible top fitment
- Replies: 10
- Views: 9071
Re: Convertible top fitment
I am looking for new J hooks as you are right, they are bent. But that is due to the resistance in the hood. If I wind them in anymore they will snap.
I'm going to remove the struts and try to loosen said bolts and will update as to my results.
Thx for the suggestion.
Cheers.
I'm going to remove the struts and try to loosen said bolts and will update as to my results.
Thx for the suggestion.
Cheers.
- Tue Sep 04, 2012 4:56 pm
- Forum: Convertible Top
- Topic: Convertible top fitment
- Replies: 10
- Views: 9071
Convertible top fitment
Hi all, glad to be a member. I have an 88 cabby and a 90 Corrado G60 to keep me busy. I just replaced the top on the cabby after following Briano and others walk throughs. Great write ups for sure. My issue, which was there before the redo as well is that my top does not fit tight to the front edge....