Topless Rabbit Forums

http://youtu.be/QiQ1r4gDl5I


This is a link to view my engine running.

i am going to start this and see how long i can keep up. i am currently unemployed, so i have time to work on my cabby, post pictures, and figure out the little things without trying to spend any coin.-challenge-i think not! I tore the carpet out of the cabby day one-(about 2yrs ago) I have had the ...

that is exactly what i was looking for-thanks CalAltaDubber for the play-by-play write up on your Posh Bunny.
i dig the shaved door handle look-real clean
i'm keeping with the rusted hood-trying to go more resto/ratrod

thanks for the pic and some awesome inspiration!

Cheers

Waddup forum, posted a few but never any pics.

Here's one to start things off. From NJ but live in the NOVA area.
If anyone's 'round here and wants to get together-please let me know, would love to chat mk1vdubs.

Any advice is appreciated.
Thanks

Yes, those wires(crz/cntrl) won't be needed in the future cause i plan on putting at least a 16V in this machine eventually..... But the real problem is with the black plastic spacer that i can't get off the steering column. The Bentley Manual says in step 4. under Removing and Installing Steering C...

Ok, I am close to replacing my ignition switch till I hit another snag in yet again another project that shouldn't be so frustrating, right? How do I get this damn spacer off of the steering column? The extra wires goin to the turn signal had to be cut...guess that will be my first shot at soldering...

Hey Briano1234, is the write up on 152.com for the A2 ignition switch viable direction to change my ignition switch in my 89 Cabby. How long should this task take me? 2 hours? Any special tricks that i need to keep an eye out for, and is there anything in there that i can upgrade/repair(performance ...

Here is a not so good picture of the hall sender that is broken off of the side of the distributor cap. I took it apart and the wires are all still attached to the distributor but i am concerned that this is the reason i am gettting nothing still. I even had the Autozone charge my battery overnnight...

I can't roll/jump start the car cause that will screw with the MAF and the catalytic converter. This is what i was told and read in the Bentley Manual.

Trying to get a picture of the hall sender posted!

Back to AutoZone the battery goes to charge. Will pick up in the morning, install, turn key and hope to be pleasantly surprised with a running motor?!?! The gentlemen at Autozone tested it, as he chuckled at me for leaving a new battery outside in the cold for more than a couple of weeks. :banghead:...

The hall sender is plugged in, the connection seems to be fine, it's just not attached to the side of the distributor. Like i said, all wiring seems to be intact. Funny too, i had the Terminal 50 plug on the wrong connection on the solenoid. When it was on the wrong one the starter tried to turn the...

Cleaned all 4 ground locations today, i am going to get some new wires for them but they look great. I bought this car because of this condition it is in, ran great before, now i still got nothing. I broke out the voltmeter today and tried to make like i knew what i was doing with it. I did get a re...

I don't really understand grounds, electronics, and wiring. I am very knew to this resto/daily driver Cabby Club. I have a basic understanding of some mechanics and have read your Mk1 Basic Electronics tutorial on Mk1Tutorials Briano1234. Thanks for the reply, info and help. My 89 Cabby is manual, s...

Bought car in September, ran great, took to a mechanic and he repaired all belts and the slop in the stick shift. Car ran even better. Cold weather hits and the battery takes a shit. Go an buy a new battery, install, and crank car to start, works for a couple of days. Then, attempt to start car foll...